Product Details:
Shape | L shape |
Color | Silver |
Usage/Application | Industrial |
Grade | EN 8D |
Length | 3-6 meter |
Material | Steel |
Technique | Hot Rolled |
Thickness | Upto 12 mm |
EN8D is a carbon steel, detailed in British Standard BS970
080A42 is a medium carbon and medium tensile steel used mainly for axles, spindles, studs, automotive and general engineering components. Suitable for heat treatment where extra strength is required. It is medium high carbon steel that can be strengthened by heat treating after forming. Machinability and weldability are fair. Typical uses include machine, plow and carriage bolts, cylinder head studs, machine parts etc. It is also used for U bolts, concrete re-enforcing rods, forgings and non critical springs.
Quick View System:
- Machineability – 80
- Weldability – Precaution May Be Required
- Hardenability – Small Sizes Suitable For Induction Hardening Selection Guide And Usage Examples – Medium tensile strength.
- Axles, shafts, spindles and studs – Metallurgical Properties
- Inclusion Rating : A B C D 2.0/1.0 E 45 A
- Grain Size : Fine grain size – ASTM No. 6-8 Decarburization &
- Surface Imperfections : 1 % of size max.
- Microstructure : Pearlte+Ferrite
Mechanical Properties:
- Coils, Hot rolled : 240 BHN max.
- Coils, Hot rolled ,Annealed: 180 BHN max
- Material Specification Sheet: UML ¬ En8D
- Grade- En8D Material Group : Carbon Steel
- International Steel Grades DIN : CK45
Chemical composition:
Properties | Metric | Imperial |
Hardness, Brinell (typical) |
300 |
33 |
Hardness, Rockwell C (typical) |
30 |
30 |
Tensile strength, ultimate |
965-1030 MPa |
140000-150000 psi |
Tensile strength, yield
|
827-862 MPa |
120000-125000 psi
|
Elongation at break (in 50 mm (2")) |
20.0% |
20.0% |
Compressive strength |
862 MPa |
125000 psi |
Charpy impact (V-Notch) |
27.1-33.9 J |
20.0-25.0 ft-lb |
Poisson's ratio |
0.27-0.30 |
0.27-0.30 |
Elastic modulus |
190-210 GPa |
27557-30457 ksi |
Mechanical Properties:
Min U.T.S.on Drawingt kg/mm2 | Mechanical Properties after heat treatment | | | Typical Appilications |
|
U.T.S |
Y.S |
Elong %min. |
|
|
Kg/mm2 min |
|
|
|
62 |
63 |
44 |
. |
Dynamos and motor shafts heat treated bolts,connecting rods and crankshafts |